Concrete

L&M™ FGS CONCRETE CONDITIONER™


Description:

L&M™ FGS Concrete Conditioner™ is a proprietary concrete cleaner and conditioner designed for on-going maintenance of hardened polished concrete surfaces.


L&M™ FGS HARDENER PLUS™


Description:

L&M™ FGS HARDENER PLUS™ is a proprietary, chemical hardening solution that is formulated to increase the wear resistance and surface strength of concrete floors.


L&M™ JOINT TITE 750™


Description:

L&M™ JOINT TITE 750™ is a self-leveling, 100% solids, two component, rapid curing, polyurea control joint and crack filler.


L&M™ VIVID DYE™


Description:

L&M VIVID DYE™ is formulated using extremely fine molecules of color designed to penetrate and color any cementitious surface.


L&M™ JOINT TITE 750™


Description:

L&M™ VIVID DYE WB PLUS™ is formulated using extremely fine molecules of color designed to penetrate and color any cementitious surface.


ARDEX X 90 OUTDOOR™


Description:

A revolutionary innovation in mortar technology that is formulated with specialty, high-performance ARDEX cements, polymers and microfibers to deliver maximum protection against the harshest weather conditions and provide the highest levels of efflorescence resistance for exterior tile and stone applications. ARDEX X 90 OUTDOOR can be installed over substrates with temperatures as low as 40˚F (5˚C) and can withstand driving rains or be grouted in only 2 hours!


ARDEX X 7 R™


Description:

A versatile, easy to apply, rapid setting, polymer modified mortar formulated with enhanced properties of adhesion and flexibility. It is the ideal everyday fast-track solution for the installation of porcelain, quarry, ceramic, mosaic and most natural stone tile.


ARDEX X 4™


Description:

The ideal everyday tile and stone mortar delivering performance and value. An easy to mix and apply, polymer-modified mortar with good sag resistance and strength for use with porcelain, ceramic, quarry, mosaics and most natural stone tile over common interior surfaces, as well as horizontal exterior installations of porcelain tile over concrete or masonry surfaces. ARDEX X 4 is recommended for most common tile sizes.


ARDEX FB 9 L™


Description:

Portland cement-based polymer modified mortar with a unique, very fluid, pourable consistency that is ideal for horizontal large format tile installations. Holds solid trowel lines and delivers full coverage eliminating the need for back buttering. Can be used over in floor heating systems on concrete subfloors.


ARDEX S 48™


Description:

The most versatile tile setting material available for interior tile applications. A rapid setting polymer-modified, Portland cement based mortar that is ideal for fast-track installations of glass tile and backsplashes. Can be used with porcelain, glass, ceramic, quarry, mosaics and most natural stone tile over all common substrates. Suitable for use in intermittent wet areas including residential bathrooms and kitchens. Its creamy, smooth consistency is similar to a pre-mixed mastic making it extremely easy to apply.


ARDEX X 7 PLUS™


Description:

ARDEX X 7 PLUS is a Portland cement-based polymer modified mortar with high bond strength and flexibility. When mixed with water, the result is a creamy smooth thin-set mortar that hardens by hydration and drying, is highly flexible, and is water and weather resistant. ARDEX X 7 PLUS bonds to all suitable concrete, masonry, and cementitious substrates.


ARDEX FG-C™


Description:

A high-performance, Portland cement-based, polymer- modified unsanded grout for walls or floors. With a creamier consistency compared to traditional unsanded grouts, ARDEX FG-C is very easy to apply delivering full grout joints with an ultra-smooth finish. Use with porcelain, glass, quarry, ceramic, mosaic and most natural stone tiles.


ARDEX FH™


Description:

An ideal, everyday, Portland cement-based, polymer-modified sanded grout suitable for all sizes of floor and wall tiles, including mosaics. ARDEX FH is a creamy, easily applied grout with good joint filling properties, enabling deep joints to be filled in one operation. When cured, ARDEX FH is weather resistant, unaffected by water and is suitable for internal and external use in dry or wet conditions.


ARDEX A 38™


Description:

A precision-engineered, polymer-modified, cement screed that sets, hardens and dries rapidly. Use for interior or exterior applications including swimming pools and other wet areas.


ARDEX EB 2™


Description:

Polymer-modified Portland cement-based hydraulic cement for producing bonded, unbonded or floating screed beds for use with tile and all other types of flooring. Ideal for high-traffic areas.


ARDEX E 100™


Description:

Acrylic-based additive that improves the elasticity, compressive and tensile strengths, workability, plasticity and abrasion resistance of sand and cement screeds, all without increasing water content. The potential for crack formation and surface dusting also is reduced. ARDEX E 100 is also ideal for use in the bonding slurry mixture for ARDEX A 38 and ARDEX A 38 MIX.​


ARDEX Liquid BackerBoard®


Description:

A Portland cement-based, polymer-modified, self-leveling underlayment that replaces traditional backer board, providing a flatter, smoother surface faster and easier for installing tile and stone. ARDEX Liquid BackerBoard can be used over interior wood or concrete subfloors. It eliminates cutting, fitting, gluing, taping, fastening and the many other steps required with bulky, hard to transport traditional backer board. The optimal tiling surface!


ARDEX TL 1000™


Description:

Portland cement-based self-leveling underlayment with specialty polymers designed specifically for fast floor leveling prior to installing tile. ARDEX TL 1000 is used to smooth new or existing concrete, terrazzo and ceramic tile substrates.


ARDEX 8+9™


Description:

The absolute best-in-class, topside waterproofing and crack isolation membrane for use on all common substrates in commercial and residential applications prior to the installation of any type of tile or stone. Two components, very easy to use, cement based waterproofing and crack isolation compound providing outstanding bond to mortars. ARDEX 8+9 can also be used as a shower pan. Ideal for use in showers, kitchens and for exterior manufactured veneer stone installations.


ARDEX SK MESH™


Description:

ARDEX SK Mesh™ is a premium, non-woven, polyester mesh reinforcement fabric. The new 36” width is ideal for large crack isolation jobs and the existing 4.75” width is used for the reinforcement of ARDEX 8+9™ Rapid Waterproofing and Crack Isolation Compound in changes of plane, changes of material, corners and for crack isolation. Also available for waterproofing tie-ins around drains with ARDEX 8+9 is ARDEX SK Drain™ Pre-Cut Drain Tie-In.


ARDEX K 301™


Description:

​ARDEX K 301™ is a self-leveling Portland cement-based topping and underlayment for fast-track resurfacing and smoothing for exterior and interior applications over concrete, porous tile and certain non-porous surfaces when properly prepared – on, above or below grade. ARDEX K 301 can be sealed to create a concrete wear surface for commercial, light industrial and residential applications, including storage rooms, workshops, parking garages, parking decks, driveways, patios and plazas. It can also be used as an underlayment for finish flooring, as well as on permanently wet areas and under moisture remediation systems such as the ARDEX Moisture Control Systems. Installs from 1/4” to 3/4” in one application, and up to 2” with the addition of appropriate aggregate. Pourable or pumpable when mixed with water. Seeks its own level and produces a smooth, flat, hard surface. Hardens quickly and dries fast without shrinking, cracking or spalling.


ARDEX CD™


Description:

​ARDEX CD™ is a concrete resurfacing compound modified with high-performance polymers for exceptional bond strength. Formulated from a blend of Portland cement and other hydraulic cements, ARDEX CD can be used over the surface of existing concrete to produce a new wear layer as well as to fill in small surface defects, such as spalls and gouges. Ideal for sidewalks, patios, plazas, courtyards, walkways, driveways, parking garages, pool decks and most vertical concrete surfaces. When mixed with water, the result is a creamy, smooth, slurry consistency that can be applied by trowel, squeegee or hopper gun. Once applied, ARDEX CD can be broom textured before it sets for a reduced-slip surface.


ARDEX CD FINE™


Description:

​ARDEX CD FINE™ is a concrete resurfacing compound modified with high-performance polymers for exceptional bond strength. Formulated from a blend of Portland cement and other hydraulic cements, ARDEX CD FINE can be used over the surface of existing concrete to produce a new wear layer as well as to fill in small surface defects, such as spalls and gouges. Ideal for sidewalks, patios, plazas, courtyards, walkways, driveways, parking garages, pool decks and most vertical concrete surfaces. When mixed with water, the result is a creamy, smooth, slurry consistency that can be applied by trowel, squeegee or hopper gun. Once applied, ARDEX CD FINE can be broom textured before it sets for a reduced-slip surface.


ARDEX CP™


Description:

​ARDEX CP™ is a trowel-grade, cementitious topping for filling and repairing areas of indoor and outdoor concrete above, on or below grade. Engineered with Portland cement and select high-performance polymers, ARDEX CP readily bonds to concrete surfaces. It is easy to apply, hardens quickly, is freeze-thaw resistant, and produces a surface finish that is suitable for foot and rubber tire traffic. When mixed with water, the result is a creamy, smooth consistency that can be applied by trowel or screed.


ARDEX ARDICOAT™ PLUS


Description:

​ARDEX ARDICOAT™ PLUS is a two component system consisting of a liquid acrylic emulsion and a blended cement powder that produce an easy to apply waterproof coating for all types of concrete and masonry on horizontal or vertical surfaces above, on and below grade. Typical applications include foundations, block wall, balconies, parapet wall, planter boxes, non-potable water tanks and fountains.


ARDEX BACA™


Description:

​​ARDEX BACA™ is a two component, brush or spray applied coating used as an anti-corrosion agent for reinforcing steel, as well as a bonding agent for fresh concrete or mortar to existing concrete surfaces that have been prepared for repair. Use ARDEX BACA as a bonding slurry on properly prepared concrete patches or apply it directly to reinforcing steel in concrete to protect against corrosion and rust once embedded.


ARDEX EP 2000™


Description:

​ARDEX EP 2000™ is a solvent-free, low viscosity, two-component, 100% solids epoxy resin primer formulated for use with ARDEX underlayments and toppings. It is especially suited to prime concrete and other structurally sound and solid substrates, including terrazzo, epoxy coatings and ceramic and quarry tile, prior to installing ARDEX products.


ARDEX P 71™


Description:

​ARDEX P 71™ Primer is a non-film forming primer. Simply broom onto the prepared substrate. Non-porous substrates such burnished concrete, terrazzo, quarry and ceramic tile must be primed with ARDEX EP 2000™ with a sand broadcast. ARDEX P 71 IS NOT FOR USE WITHOTHER ARDEX SELF-LEVELING MATERIALS. Please refer to the individual ARDEX Product Technical Brochures for appropriate priming information.


ARDEX ARDIFIX™


Description:

ARDEX ARDIFIX™​​​ is a two-part polyurethane repair compound for cracks, control joints, spalls and pop-outs on interior or exterior applications. It is ideally suited to seal off cracks and saw-cuts prior to the installation of ARDEX MC™ Moisture Control Systems, Underlayments and Toppings. ARDEX ARDIFIX is ultra fast setting allowing the installation to proceed within minutes of application. ARDEX ARDIFIX is 100% solids for no shrinkage and cures to a rigid hardness. It also has a wide service temperature range of 0°F to 110°F (-17 to 43°C), making it suitable for applications from freezers to warehouses.


ARDEX CG Concrete Guard™


Description:

​ARDEX CG™ is a high-performance, high solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, ARDEX CG is designed to protect all interior and exterior absorbent concrete and masonry surfaces on residential, commercial and light industrial applications, including sidewalks, patios, plazas, courtyards, walkways, driveways, parking garages, pool decks and most vertical concrete surfaces. It is especially suited to seal ARDEX toppings and the gray version can be used to create a uniform appearance over both a repaired area and the adjacent concrete or masonry surfaces. For usage instructions with ARDEX toppings, please refer to the individual product brochures.


ARDEX ERM™ Exterior Ramp Mortar


Description:

​ARDEX ERM Exterior Ramp Mortar is a trowel-grade, polymer-modified, Portland cement-based structural repair mortar. It is used at depths ranging from 1/4” to 2” (6mm to 5 cm) neat, and can be extended up to 8” (20 cm) for deeper and full depth repairs of deteriorated exterior and interior concrete above, on or below grade. ARDEX ERM has a corrosion inhibitor built-in to protect reinforcing steel, is easy to apply and readily bonds to concrete. The resulting patch has low shrinkage and resists delamination, producing a surface suitable for commercial, institutional and multi-unit residential traffic. Typical applications include sidewalks, plazas, walkways, driveways, parking garages and balconies.


ARDEX FDX™


Description:

​ARDEX FDX™ is a formable, pourable, pumpable structural repair mortar for horizontal, vertical and overhead applications for exterior and interior concrete above, on or below grade. ARDEX FDX contains pre-blended aggregate for precise jobsite control. It has a corrosion inhibitor built-in to protect reinforcing steel, is easy to apply, and readily bonds to concrete. The resulting patch has low shrinkage and resists delamination. Typical applications include balconies, plaza decks, columns, walls and parking decks.


ARDEX FDM™ Full Depth Repair Mortar


Description:

​ARDEX FDM™ is a formable, pourable, pumpable, Portland cement-based structural repair mortar for horizontal, vertical and overhead applications for exterior and interior concrete above, on or below grade. ARDEX FDM is easy to apply, and readily bonds to concrete. The resulting patch has low shrinkage and resists delamination. Typical applications include balconies, plaza decks, columns, walls and parking decks.


ARDEX TRM™


Description:

​ARDEX TRM Transportation Repair Mortar is a formable, pourable, pumpable structural repair mortar for deteriorated exterior and interior concrete above, on or below grade. ARDEX TRM is fast-setting, allowing foot traffic in just 2 hours, and vehicular traffic in as little as 6 hours. It is also easy to apply and readily bonds to concrete. The resulting patch has low shrinkage, resists delamination and produces a surface suitable for normal commercial, institutional and multi-unit residential traffic. Typical applications include plazas, parking garages and balconies.


ARDEX FP™ Form & Pour


Description:

​ARDEX FP™ Form & Pour is a formable, pourable, pumpable structural repair mortarfor horizontal, vertical and overhead applications for exterior and interior concrete above, on or below grade. ARDEX FP is easy to apply and readily bonds to concrete. The resulting patch has low shrinkage and resists delamination. Typical applications include balconies, plaza decks, columns, walls and parking decks.


ARDEX B 20™ Overhead & Vertical Repair


Description:

​ARDEX B 20™ is a trowel-grade, Portland cement-based, polymer modified, structural repair mortar for vertical and overhead concrete. ARDEX B 20 has a corrosion inhibitor built-in to protect reinforcing steel, is easy to apply and readily bonds to concrete. The resulting patch has low shrinkage and resists delamination, producing a surface suitable for commercial, institutional and multi-unit residential applications, including parking garages, overhead walkway and columns - virtually any vertical or overhead concrete surface that needs to be repaired.


ARDEX TWP™


Description:

​ARDEX TWP™ is a trowelable Portland cement-based finishing compound used to fill and smooth interior and exterior vertical concrete surfaces such as tilt-up walls, pre-cast or poured in place concrete panels, and other concrete or masonry surfaces prior to sealing or painting. When mixed with water, it renders a creamy, smooth consistency ideal for filling in surface defects such as spalls, gouges, cracks, dents, chips, bug holes or honeycombs – any type, size or shape of surface defect that needs to be filled and smoothed before coating. ARDEX TWP hardens quickly and dries fast without shrinking, cracking or spalling. It is tougher and


ARDEX OVP™


Description:

​ARDEX OVP™ is a trowelable finishing compound used for tilt-up walls, pre-cast or poured in place concrete panels, and other concrete or masonry surfaces. When mixed with water, it renders a creamy, smooth consistency ideal for filling in surface defects such as spalls, gouges, cracks, dents, chips, bug holes or honeycombs – any type, size or shape of surface defect that needs to be filled and smoothed before coating.


ARDEX ARDICOAT™ MESH


Description:

​ARDEX ARDICOAT MESH is a highly flexible treated glass fiber mesh that reinforces ARDEX ARDICOAT PLUS waterproofing compound. Embedding this mesh into the freshly applied waterproofing compound helps to minimize telegraphing of dormant cracks, and also reinforces critical transitions where building materials change planes. Typical uses are over dormant cracks as well as floor to wall and wall to wall transitions on commercial and institutional applications.


ARDEX ARDIFIX™


Description:

ARDEX ARDIFIX™ is a two-part polyurethane repair compound for cracks, control joints, spalls and pop-outs on interior or exterior applications. It is ideally suited to seal off cracks and saw-cuts prior to the installation of ARDEX MC™ Moisture Control Systems, Underlayments and Toppings. ARDEX ArdiFix is ultra fast setting allowing the installation to proceed within minutes of application. ARDEX ArdiFix is 100% solids for no shrinkage and cures to a rigid hardness. It also has a wide service temperature range of 0°F to 110°F (-17 to 43°C), making it suitable for applications from freezers to warehouses.


ARDEX ARDISEAL™ RAPID PLUS


Description:

​ARDEX ARDISEAL™ RAPID PLUS is a two-part, self-leveling, semi-rigid joint filling compound. Designed specifically to accommodate heavy traffic, use ARDEX ARDISEAL RAPID PLUS indoors to fill cracks and joints in concrete floors that will receive both foot and heavy-duty rubber-wheeled traffic. ARDEX ARDISEAL RAPID PLUS is 100% solids for no shrinkage in the joints, and cures to a semi-rigid hardness. Its wide service temperature range of -40°F to 120°F (-40°C to 48°C) makes it ideal for freezer applications and warehouses alike. Please note the color of ARDEX ARDISEAL RAPID PLUS may vary from batch to batch, and the color stability may be affected by environmental conditions such as high humidity, lighting, sunlight exposure or chemical exposure. This product is not designed to be UV color stable.


ARDEX PC 10™


Description:

Use ARDEX PC 10™ as part of the ARDEX PC-T™ Polished Concrete Topping System or with other ARDEX Engineered Toppings to make an extremely dense, durable hard surface that resists dusting and wear. When used with resin phenolic diamonds, ARDEX PC 10’s advanced chemistry creates a surface with higher reflectivity, longer life and lower maintenance costs. Interior use only.


ARDEX PC 50™


Description:

​ARDEX PC 50™ Lithium Densifier is an economical, cost effective chemical treatment used to enhance the grinding and polishing process (metal and resin-bonded abrasives) of architectural polished concrete surfaces. ARDEX PC 50 rapidly produces a harder, denser surface that is easily profiled and polished. Its deep penetrating, non-soluble properties provide longer life and higher reflectivity. Ultimately, this results in superior durability, exceptional shine retention and reduced floor maintenance costs. ARDEX PC 50 is crucial to the installation of ARDEX Polished Concrete Systems when polishing, or re-polishing and restoring worn or damaged surfaces.


ARDEX PC FINISH™


Description:

​Use ARDEX PC FINISH™ High or Low Gloss on newly polished concrete, colored concrete, concrete toppings and for restoring existing surfaces. This reactive micro-impregnating SiRE™ (Silicon Reactive Lithium) polymer gives surfaces higher gloss and increased abrasion and stain resistance while lowering maintenance costs. Apply with a micro-fiber pad and applicator then burnish with diamond impregnated pads to create a glossy finish with excellent wear properties and extended life.


ARDEX PC-T™


Description:

Self-leveling topping base for floors that will receive a polished concrete surface. Designed for use with ARDEX Polished Concrete Systems. ​


ARDEX SD-M™


Description:

​ARDEX SD-M™ is a self-drying, Portland cement-based, trowelable topping for fast track finishing or resurfacing of interior concrete and certain non-porous surfaces. Use ARDEX SD-M to provide a hard, flat, smooth surface for warehouses, utility rooms and light manufacturing. ARDEX SD-M can also be installed to create ARDEX DESIGNER FLOORS™ in areas such as retail, hospitality, lobbies, stores, and all interiors requiring such a surface. ARDEX SD-M can be installed at a minimum thickness of only 20 mils (0.020”), minimizing height transition issues, and can be sealed in as little as 2 hours.


ARDEX EP 2000™


Description:

​ARDEX EP 2000™ is a solvent-free, low viscosity, two-component, 100% solids epoxy resin primer formulated for use with ARDEX underlayments and toppings. It is especially suited to prime concrete and other structurally sound and solid substrates, including terrazzo, epoxy coatings and ceramic and quarry tile, prior to installing ARDEX products.


ARDEX PANDOMO® CF1


Description:

​ARDEX PANDOMO® CF1™ is a self-drying, self-leveling, no troweling topping for fast-track resurfacing, smoothing or leveling of indoor concrete. Formulated with a blend of Portland and other hydraulic cements, along with special re-dispersable powdered polymers and selected sand aggregates, ARDEX PANDOMO CF1 can be installed from 1/4” to 1” (6 to 24 mm) in one operation, hardens quickly and can be lightly walked on in as little as 2 to 3 hours. Use ARDEX PANDOMO CF1 for producing high-end, creatively designed wear surfaces of ARDEX PANDOMO Floor and FloorPlus in commercial areas such as retail stores, shops, hotels, cafés and vestibules, or even for light industrial use.


ARDEX PANDOMO® CF3


Description:

​ARDEX PANDOMO® CF3™ is a self-drying, self-leveling, no troweling topping for fast-track resurfacing, smoothing or leveling of indoor concrete. Formulated with a blend of Portland and other hydraulic cements, along with special re-dispersable powdered polymers and selected sand aggregates, ARDEX PANDOMO CF3 can be installed from 1/4” to 1” (6 to 24 mm) in one operation, hardens quickly and can be lightly walked on in as little as 2 to 3 hours. Use ARDEX PANDOMO CF3 for producing high-end, creatively designed wear surfaces of ARDEX PANDOMO Floor and FloorPlus in commercial areas such as retail stores, shops, hotels, cafés and vestibules, or even for light industrial use.


ARDEX PANDOMO® K2


Description:

​ARDEX PANDOMO K2 is a self-drying, trowel-applied micro topping for fast-track resurfacing of indoor concrete. Installed at a thickness from 1/16” to 3/16” (1.5 to 4.5 mm), use ARDEX PANDOMO K2 for producing high-end, hand troweled, creatively designed ARDEX PANDOMO Loft wear surfaces. Use in areas subject to light or medium loads, and for foot traffic such as retail stores, shops, hotels, cafés, vestibules and private residences.


ARDEX PANDOMO® HG Sand


Description:

ARDEX PANDOMO® HG Hardgrain Sand is a special silica sand blend used to create ARDEX PANDOMO FloorPlus floors when installing ARDEX PANDOMO CF1, CF3, K1 and K3


ARDEX PANDOMO® ES


Description:

​ARDEX PANDOMO® ES is a waterborne, two-part epoxy floor primer for interior use over ARDEX PANDOMO Floor, FloorPlus and Loft. Designed to penetrate porous surfaces, ARDEX PANDOMO ES serves as a fast-drying base coat for the subsequent installation of two coats of ARDEX PANDOMO PS Clear Waterborne Two-Part Urethane Protective Wear Layer. Use as a system with ARDEX PANDOMO® PS Urethane Protective Wear Layer to seal and protect ARDEX PANDOMO® Floor, FloorPlus and Loft


ARDEX PANDOMO® PS


Description:

​ARDEX PANDOMO® PS is a two-part urethane protective wear layer for interior use on ARDEX PANDOMO Floor, FloorPlus and Loft. Designed to be used as a top coat over ARDEX ES Epoxy Floor Primer, ARDEX PANDOMO PS dries quickly to allow the installation of a second coat in as little as 2 hours.


ARDEX PANDOMO® SL


Description:

​ARDEX PANDOMO® SL is a blend of natural mineral oil and wax that creates a color-intensifying semi-gloss finish on ARDEX PANDOMO K1, ARDEX PANDOMO K2 and ARDEX PANDOMO K3 wear surfaces, as well as for ARDEX PANDOMO W1 Wall Surfaces. ARDEX PANDOMO SL is an excellent choice for residential and light-duty retail applications with low foot traffic and low potential for staining from spills.


ARDEX EP 2000™


Description:

​ARDEX EP 2000™ is a solvent-free, low viscosity, two-component, 100% solids epoxy resin primer formulated for use with ARDEX underlayments and toppings. It is especially suited to prime concrete and other structurally sound and solid substrates, including terrazzo, epoxy coatings and ceramic and quarry tile, prior to installing ARDEX products.


ARDEX PANDOMO® W1


Description:

​​ARDEX PANDOMO® W1 is a self-drying, trowel applied finishing compound for walls and ceilings. Formulated with a blend of Portland and other hydraulic cements and special re-dispersible powdered polymers, ARDEX PANDOMO W1 exhibits excellent non-sag properties and hardens quickly. ARDEX PANDOMO W1 has excellent adhesion over a wide variety of porous surfaces, including concrete, gypsum plaster, drywall and all types of masonry surfaces. Use ARDEX PANDOMO W1 for producing high-end, creative ARDEX PANDOMO Wall surfaces in areas such as retail stores, shops, hotels, cafés and vestibules, as well as for residential applications.